DisCap
http://www.discap.net/forum/

Bridges
http://www.discap.net/forum/viewtopic.php?f=5&t=2290
Page 1 of 1

Author:  timdef [ Tue Feb 12, 2013 11:14 am ]
Post subject:  Re: Melting ice on tee pads

i hope i can get out there this weekend...

Author:  Morgan [ Tue Feb 12, 2013 12:29 pm ]
Post subject:  Bridges

Bridges on 16, 3, 12, and 17 will be getting the army corps of engineers treatment this year. They suck and need to unsuck.

Author:  timdef [ Tue Feb 12, 2013 1:21 pm ]
Post subject:  Re: Bridges

...18 could be added to the list but not terribly urgent. It's only scary when there is snow/ice on it

Author:  timdef [ Tue Feb 12, 2013 2:51 pm ]
Post subject:  Re: Bridges

1) learn something about bridge building
then, either
2a) understand wood requirements for the bridge(s) we want to build (which means a wood assessment has to take place)
or
2b) understand what we can do with the hardwood we have at Hyzer (also means a wood assessment has to take place)
3) solicit volunteers
4) assess tool requirements
5) get tools
6) execute

Author:  Morgan [ Tue Feb 12, 2013 4:53 pm ]
Post subject:  Re: Bridges

The bridge on 9 at J Park can be the prototype. Check it out:

http://www.dgcoursereview.com/course_pi ... ce305d.jpg

3 long pressure treated 6x6 beams lengthwise and 2 x 12's crosswise, bridge around 3 feet wide

Author:  Morgan [ Tue Feb 12, 2013 4:54 pm ]
Post subject:  Re: Bridges

Bridge on 17 can be made of the two hemlocks that are there and can be felled into position.

Author:  timdef [ Fri Feb 15, 2013 11:02 am ]
Post subject:  Re: Bridges

timdef wrote:
2a) understand wood requirements for the bridge(s) we want to build (which means a wood assessment has to take place)
or
2b) understand what we can do with the hardwood we have at Hyzer (also means a wood assessment has to take place)


Sunday will be too cold for these fingers so instead of playing maybe i'll come and scope out what we're working with.

Author:  timdef [ Sun Feb 17, 2013 1:39 pm ]
Post subject:  Re: Bridges

large tree to be a major anchor for new bridge on 17: 1 Morgan and Tim: 0

...watch out near 17 tee! unless you see a large tree down... then you should be fine


anyone have a ~50'+ chain Morgan can borrow for come-a-long to pull tree?

Author:  Morgan [ Mon Feb 18, 2013 12:28 pm ]
Post subject:  Re: Bridges

I can do it with a 25 foot chain also. Maybe even less.

Author:  timdef [ Sun Mar 03, 2013 2:20 pm ]
Post subject:  Re: Bridges

what's the next step for the 17 tee-to-fairway bridge? taking down another tree?

Author:  Morgan [ Sun Mar 03, 2013 8:38 pm ]
Post subject:  Re: Bridges

Next step it to wait until spring.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/